How to Setup Nagios & NREP in RHEL/CentOS - 6 Steps

Nagios is a powerful Open Source Monitoring tool that provides you with instant awareness of your organization's mission-critical IT infrastructure. Nagios allows you to detect and repair problems and mitigate future issues before they affect end-users and customers.

 We can monitor remote host and their services (HTTP, MYSQL, Disk Space etc) remotely. Its show’s warnings and alerts if something went wrong in remote servers, which will help us to detect the problem in server and find a solution for the issue which helps us to reduce the downtime of server.

Nagios will be installed in a server where we will monitor all our client machines and in client side we will install Nagios NRPE (Nagios Remote Plugin Executor) which will communicate with the Nagios server and send client machine status.

Step 1: Install Required Packages and Dependencies in Nagios Server

We need to install Apache, Php and supporting libraries file such as gcc, glibc, glibc-common, and GD libraries.

[root@linuxstorages ~]#yum install gd gd-devel gcc glibc glibc-common -y

To install nagios through yum we need to add EPEL repository in yum.

[root@linuxstorages ~]# wget http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm

[root@linuxstorages ~]#rpm -ivh epel-release-6-8.noarch.rpm

Now install nagios via yum 

[root@linuxstorages ~]#yum install nagios* -y

Step 2 : Configure Nagios Server

Add the admin mail address in the nagios contact file to receive alerts from nagios server.

[root@linuxstorages ~] vi /etc/nagios/objects/contacts.cfg
#
# CONTACTS
#
###############################################################################
###############################################################################
# Just one contact defined by default - the Nagios admin (that's you)
# This contact definition inherits a lot of default values from the 'generic-contact'
# template which is defined elsewhere.

#define contact{
#        contact_name                    nagiosadmin             ; Short name of user
#        use                                    generic-contact         ; Inherit default values #from generic-contact template (defined above)
#        alias                                  Nagios Admin            ; Full name of user
#        email                                 nagios@localhost        ; <<***** CHANGE THIS TO #YOUR EMAIL ADDRESS ******
#        }
define contact{
        contact_name                    pravin_contact             ; Short name of user
        use                                    generic-contact         ; Inherit default values from generic-contact template (defined above)
        alias                                  Nagios Admin            ; Full name of user
        email                                 pravin@linuxstorages.com   ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
        }
:wq(save file)

To allow Nagios server admin link from particular ip address (192.168.1.54).

  [root@linuxstorages ~]# vi /etc/httpd/conf.d/nagios.conf

## Comment Lines 15 & 16 ##

#   Order allow,deny

#   Allow from all

 ## Uncomment and Change lines 17,18 & 19 as shown below ##

Order deny,allow

Deny from all

Allow from 127.0.0.1 192.168.1.54
:wq (save)

Now we can access Nagios admin link only from localhost and 192.168.1.54. 

Step 3 : Create User and password for Nagios Admin.

  [root@linuxstorages ~]#  htpasswd /etc/nagios/passwd nagiosadmin

New password:

Re-type new password:

Updating password for user nagiosadmin

Step 4 : Start Apache and Nagios service and make chkconfig(Service Start automatically on every boot). 

  [root@linuxstorages ~]# /etc/init.d/nagios start
 Starting nagios: done.

  [root@linuxstorages ~]#/etc/init.d/httpd start

 Starting httpd:                                            [  OK  ]
   [root@linuxstorages ~]#chkconfig nagios on
        
  [root@linuxstorages ~]#chkconfig httpd on 

Now access the Nagios admin link and enter user & password which created before.

Link : http://localhost/nagios 

Step 5 : Installing NRPE on Nagios Remote Host server’s 

NRPE  Nagios Remote Plugin Executor which allows you to remotely execute Nagios plugins on other Linux/Unix machines. This allows you to monitor remote machine metrics (disk usage, CPU load, etc.). NRPE can also communicate with some of the Windows agent addons, so you can execute scripts and check metrics on remote Windows machines as well.

[root@linuxstorages ~]# yum install nagios-plugins-all nrpe openssl

Configure nrpe configuration in remote host by adding Nagios server ipaddress.

[root@linuxstorages ~]# vi /etc/nagios/nrpe.cfg

[...]

## Line 81 - Add the Nagios server IP  and check_nrpe commands ##

allowed_hosts=127.0.0.1,192.168.1.54

##Line 210 ##

command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10

command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20

command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1

command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z

command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200

command[check_swap]=/usr/lib64/nagios/plugins/check_swap -w 20 -c 10

[...]

:wq (save)

Restart the nrpe service in remote host.

[root@linuxstorages ~]# service nrpe restart

[root@linuxstorages ~]# chkconfig nrpe on

Step 6 : Now switch back to Nagios server and edit below configuration file.

By default NRPE command wont be available in commands.cfg, to execute the in check_nrpe command in configuration file we need to add it in commands.cfg

[root@linuxstorages ~]# vi /etc/nagios/objects/commands.cfg

# add at the bottom

define command{

command_name   check_nrpe

command_line    $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$

}

:wq (save)

Now Change configuration in nagios.cfg

    [root@linuxstorages ~]# vi /etc/nagios/nagios.cfg

    and uncomment the following lines.

    ## Line 52 - Uncomment ##

    cfg_dir=/etc/nagios/servers

    :wq (save)

Create a directory called “servers” under “/etc/nagios/”.

[root@linuxstorages ~]# mkdir –p /etc/nagios/servers

Now create a configuration files for remote host server's in /etc/nagios/servers path.

[root@linuxstorages ~]#cd /etc/nagios/servers

    [root@linuxstorages ~]#vi client-server-1.cfg

     Check nrpe configuration file in remote client machine so that we can use same command

     in this file too.

               define host {
          
            use                                 linux-server
          
            host_name                        client-server1
          
            alias                            client-server1
          
            address                         192.168.1.101
    
     max_check_attempts              5
    
     check_period                    24x7
    
     notification_interval           30
    
     notification_period             24x7
    
     }
    

        define service {

                use                                   generic-service

                host_name                        client-server1

                service_description              PING

                check_command               check_ping!100.0,20%!500.0,60%

                }

        define service {

                use                                   generic-service

                host_name                        client-server1

                service_description             SSH

                check_command               check_ssh

                notifications_enabled            0

                }

        define service {

                use                                  generic-service

                host_name                        client-server1

                service_description           CPU Load

                check_command              check_nrpe!check_load

                }

        define service {

                use                                  generic-service

                host_name                        client-server1

                service_description          Login Users

                check_command               check_nrpe!check_users

                }

        define service {

                use                                  generic-service

                host_name                      client-server1

                service_description          Disk Usage

                check_command              check_nrpe!check_hda1

                }

        define service {

                use                                  generic-service

                host_name                       client-server1

                service_description           Total Process

                check_command              check_nrpe!check_total_procs

                }

        define service {

                use                                  generic-service

                host_name                        client-server1

                service_description           Swap Usage

                check_command             check_nrpe!check_swap

                }

same configuration should to be done for all remote host client machines.

Restart the Nagios server, after all configuration's done in both client and server side.

[root@linuxstorages ~]#/etc/init.d/nagios restart

Running configuration check...done.
Stopping nagios: done.
Starting nagios: done.

Now access the Nagios Monitoring Tool in Web Interface by using Nagios admin link and make sure services for remote host.

Nagios Host View

Nagios Service View

Browse More Articles

Tweet

Written by Unknown